Garage Screen Door DIY Installation Videos

Make sure to measure the backside of your garage door.

Make sure you are using a brand new razor blade when cutting screen.

1. Be sure to inspect all packages for damages at time of delivery. Any damages must be notated on shippers receipt before driver leaves.

2. NEVER slice into any of the boxes with a razor knife.

1. Take the time to get organized. It will definitely be worth your time and help speed up your installation.

Be mindful that repeated opening and closing of the garage door can overheat the opener.

Use only a hand screw driver when attaching magnet catches and DO NOT OVER TIGHTEN.

Backer rod or pipe insulation can be used to level the frame. It can also be used when more height is needed from the frame to accommodate over sized openings.

1. Tracks should NOT touch the floor.
2. Tightening the fasteners of the track should be done last. Start from the back and work your way forward, ensuring the tracks line up and fit in the tight radius corners so rollers will operate smoothly during transition through the tight radius from horizontal to vertical.

1. ALWAYS have the safety cable in place.
2. Spring chart in the installation manual is a starting point. The more pretension you add the easier the screen will go up but it will take more effort to put down.

1. The retractable door comes ready to install on the right hand side of the opening (outside looking in).
2. Handles of the retractable need to be centered on the pull bar and tightened. DO NOT OVERTIGHTEN.
3. Only use a dry silicone spray when lubricating the track of the retractable door.

none.

none.

1. When retracting the California Lifestyle Screen, always store with retractable center door in the retracted position.

Never use WD-40 as lubricant. Always use a dry silicone spray lubricant.